Avaya Connecting ASN Routers to a Network Instrukcja Użytkownika Strona 98

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 106
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 97
Connecting ASN Routers to a Network
B-2
303549-A Rev 00
Hints
This section contains a few hints for setting up ASN routers.
We recommend that you first install a router in the same site as your BOOTP
server, Site Manager workstation, and intermediate routers to test the software
image, configuration file, and routing path. This test provides you with the
startup and troubleshooting experience you need to perform these tasks on
routers at remote sites. After you perform the test, move the test router to the
remote location you want, modify the configuration file for that router, and set
up the new paths.
After you build and test a router configuration file, make copies of it on the
Site Manager workstation. Then modify the copies for each router in your
network rather than starting from scratch. To avoid mix-ups, make sure the
filename you assign to each configuration file is unique and meaningful for
each router.
If you use TFTP to transfer the software image file to upgrade or restore the
routers file system, specify the image shipped for the router you purchased. If
you boot a router with an image designed for use with another router type, the
router will fail to boot.
If you upgrade all routers in the paths between the routers and the BOOTP
server to Version 7.80 or later (BayStream Version 5.00 or later) before you
set up the paths, it may be easier to isolate BOOTP and TFTP configuration
errors on the network.
Note:
You can change the name of the asn.exe file in the local file system —
even if the
bconfig
command is
boot image=network.
If you change the
name of the software image file, you must use the form
<new_name>.exe
.
When you boot with a renamed image, you are performing a “named boot.”
However, this does not affect the pathname of the image retrieved from the
network. The “
-
” (no volume) symbol allows a named boot or configuration if
at least one of the two
bconfig
settings is local.
Przeglądanie stron 97

Komentarze do niniejszej Instrukcji

Brak uwag

Neff S72N65X4EU manuales

Manuales del propietario y guías del usuario para Lavaplatos Neff S72N65X4EU.
Ofrecemos 3 manuales en pdf Neff S72N65X4EU para descargar gratis por tipos de documentos: Manual de usuario


Neff S72N65X4EU Manual de usuario (44 paginas)


Marca: Neff | Categoria: Dishwashers | Tamaño: 2.09 MB |

 

Neff S72N65X4EU Manual de usuario (52 paginas)


Marca: Neff | Categoria: Dishwashers | Tamaño: 2.18 MB |

 




Más productos y manuales para Lavaplatos Neff

Modelos Tipo de documento
S58E50X0EU Manual de usuario   Neff S58E50X0EU Manual del usuario, 46 paginas
S51U69X2EU Manual de usuario   Neff S51U69X2EU Manual del usuario, 50 paginas
S52U69X3EU Manual de usuario   Neff S52U69X3EU Manual del usuario, 50 paginas
S58T69X3EU Manual de usuario   Neff S58T69X3EU Manual del usuario, 48 paginas
S51M63X6EU Manual de usuario   Neff S51M63X6EU Manual del usuario, 52 paginas
S51E50X3EU Manual de usuario   Neff S51E50X3EU Manual del usuario, 50 paginas
S65M63N3EU Manual de usuario   Neff S65M63N3EU Manual del usuario, 41 paginas
S66M63N3EU Manual de usuario   Neff S66M63N3EU Manual del usuario, 43 paginas
S42N69N5EU Manual de usuario   Neff S42N69N5EU Benutzerhandbuch, 2 paginas
S51T65X4RU Manual de usuario   Инструкция по эксплуатации Neff S51T65X4RU, 36 paginas
S58E40X0RU Manual de usuario   Инструкция по эксплуатации Neff S58E40X0RU [en] , 34 paginas
S58M43X0RU Manual de usuario   Инструкция по эксплуатации Neff S58M43X0RU, 36 paginas
S58M58X0RU Manual de usuario   Инструкция по эксплуатации Neff S58M58X0RU, 36 paginas
S51M69X1RU Manual de usuario   Инструкция по эксплуатации Neff S51M69X1RU, 36 paginas
S48E50N0RU Manual de usuario   Инструкция по эксплуатации Neff S48E50N0RU, 36 paginas
S52M65X3RU Manual de usuario   Инструкция по эксплуатации Neff S52M65X3RU, 36 paginas