Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Instrukcja Użytkownika Pobierz pdf (Strona 155)

SNMP, BootP, DHCP, and RARP Parameter Descriptions

117362-C Rev 00

A-19

Parameter: Output IP Address

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Forward I/F > Add

Default: None

Options: Any valid IP address

Function: Specifies the IP interface that forwards BOOTREQUEST packets to an external

network.

Instructions: Enter the IP address of a numbered network interface that you want to send

BOOTREQUEST or DHCP packets to servers, and then configure this IP

address on the router, if you have not already done so.

Do not specify an unnumbered interface for this parameter. If you want to use an

unnumbered interface to send BOOTREQUEST or DHCP packets to servers,

you must set up a preferred server from the BOOTP Relay Agent Interface

Table window.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.4

Parameter: Enable/Disable

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Forward I/F > Add

Default: Enable

Options: Enable

Disable

Function: Specifies whether this forwarding route is active.

Instructions: Select Enable to allow BootP or DHCP forwarding through this route. Select

Disable to prevent BootP or DHCP forwarding through this route.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.2

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 175 176

Brak uwag

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Instrukcja Użytkownika Strona 155