Avaya Configuring Frame Relay Services Instrukcja Użytkownika Strona 58

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 68
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 57
Configuring Frame Relay Services
A-8 114058 Rev. A
Service Record Parameters
Parameter: Service Name
Path: Configuration Manager (select a connector) > Edit Connector window > Edit
Circuit > Services > Frame Relay Service List window
Default: None
Options: Variable length text string
Function: Identifies the service record.
Instructions: Each service record must have a unique name. The value of this parameter is
supplied by your service provider. Change it only if you are certain that the new
name you assign is unique in your network.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.5.1.7
Parameter: DLCI Number
Path: Configuration Manager (select a connector) > Edit Connector window > Edit
Circuit > Services > Frame Relay Service List window > Add
Default: None
Options: The Frame Relay switch provider assigns DLCI numbers. These assigned
numbers are valid options.
Valid DLCI numbers vary based on the Frame Relay address length. The DLCI
numbers that the switch provider assigns are generally in the following ranges:
2 byte -- 16 through 1007
3 byte -- 1024 through 6451
4 byte -- 131072 through 8257535
Function: Specifies the PVC identification number that the Frame Relay network uses to
direct data. If you are running IP over Frame Relay, the router uses this number
as the MAC address for an adjacent host. Refer to Configuring IP Services for
more information about adjacent hosts.
Instructions: Enter the decimal number that the Frame Relay provider assigns.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.2.1.4
Przeglądanie stron 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag