Avaya Configuring ATM Half-Bridge Services Instrukcja Użytkownika Pobierz pdf (Strona 74)

Configuring ATM Half-Bridge Services

A-18

308611-14.00 Rev 00

Parameter: Use Hardware MAC Address

Path: Configuration Manager > Protocols > ATM > Interfaces

Default: Enable

Options: Enable

Disable

Function: Specifies whether or not to use the hardware MAC address for this interface.

When this parameter is enabled, the Configuration Manager uses the ATM

hardware MAC address of the link module for the end station identifier when

automatically generating the user part (suffix) of an SVC service record ATM

address.

When this parameter is disabled, the Configuration Manager uses the value

specified in the MAC Address Override parameter to define the end station

identifier when automatically generating the user part (suffix) of an SVC service

record ATM address.

Instructions: Accept the default, Enable, if you want to use the MAC address of the ATM

interface when automatically generating the end station identifier portion of the

ATM address user part.

Set this parameter to Disable if you want to use the MAC Address Override

value when automatically generating the end station identifier portion of the

ATM address user part.

If you set this parameter to Disable, you must enter a value for the MAC

Address Override parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.1.1.18

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 93 94

Brak uwag

Avaya Configuring ATM Half-Bridge Services Instrukcja Użytkownika Strona 74