Avaya Configuring ATM Half-Bridge Services Instrukcja Użytkownika Pobierz pdf (Strona 34)

Configuring ATM Half-Bridge Services

2-4

300017-A Rev. 00

Configuring Circuitless IP on the Router

To operate AHB, you must configure unnumbered IP interfaces on the router and

assign an associated IP address to each interface. You can elect to use the

circuitless IP address as the associated address for unnumbered interfaces.

AHB uses unnumbered interfaces because not all hosts attached via the ATM

circuit are on the same IP network. Furthermore, a host may change its IP network

over time (due to subscribing with different service providers), and it would be

inconvenient to move the PVC for that host each time its network IP address

changes.

When you configure a circuitless IP interface, note the following:

• You can configure only one circuitless IP interface per router.

• You must assign a unique IP address and subnetwork number to the circuitless

IP interface.

A circuitless IP interface has an IP address that is not mapped to the address of a

specific circuit. Thus, if one or more of the router’s IP interfaces becomes

disabled, this circuitless feature ensures that the router is always reachable using

the circuitless interface address, as long as a viable path to the router exists.

For more information about circuitless interfaces, see Configuring IP Services.

To configure a circuitless IP interface on the router, begin at the Configuration

Manager window and complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

Circuitless IP

. The Circuitless IP menu opens.

4. Choose

Create

. The IP Configuration window opens.

(continued)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 93 94

Brak uwag

Avaya Configuring ATM Half-Bridge Services Instrukcja Użytkownika Strona 34