
Starting ATM DXI
117375-A Rev. A
1-3
Adding PVCs to an ATM DXI Circuit
You must add at least one PVC to an ATM DXI circuit for it to function. To add a
PVC:
1.
From the Configuration Manager window, select Protocols > ATM DXI >
Interfaces.
The ATM DXI Interface List window opens. The new ATM DXI interface
appears highlighted at the top of the window.
2.
Click on the PVCs button.
The ATM DXI PVC List window opens.
3.
Click on Add.
The ATM DXI Virtual Circuit window opens.
4.
Supply the following information:
•
A VPI (virtual path identifier) number. You must enter a valid VPI
number. The range for the VPI number varies depending on the DXI
Mode specified in the ATM DXI Interface List window. Since we are
using the default DXI Mode in this section, enter a value between 0 and
15 for the VPI number.
• A VCI (virtual circuit identifier) number. You must enter a valid VCI
number. The range for the VCI number varies depending on the DXI
Mode specified in the ATM DXI Interface List window. Since we are
using the default DXI Mode in this section, enter a value between 32 and
63 for the VCI number.
Caution: The DXI mode default setting (Mode 1A) defines specific virtual
path identifier (VPI) and virtual channel identifier (VCI) ranges for this PVC.
Make sure you want to use DXI Mode 1A before continuing. Refer to
“Changing the DXI Mode,” in Chapter 4, for more information about
modifying the DXI mode setting.
Appendix , “VPI Number
Appendix , “VCI Number
Komentarze do niniejszej Instrukcji