Avaya Digital Drop and Insert (DDI) MUX Przewodnik Instalacji Pobierz pdf (Strona 16)

16 Installing the DDI MUX

P0989728 02

To determine the DIP switch settings for the DDI MUX:

1 Use Table 1 to determine the DS30 channel that assigns the line numbers you want to use with

the DDI MUX.

2 Use Table 1 to determine the DIP switch settings you want to use for the DDI MUX.

The DS30 channel you choose for the DDI MUX, and next DS30 channel, can not be used by any

other media bay module installed in the Business Communications Manager system. For detailed

information about choosing the DS30 channels for all of the media bay modules, refer to the

Business Communications Manager Installation and Maintenance Guide.

Setting the DIP switches on the DDI MUX

After you have determined the DIP switch settings for the DDI MUX, you need to set the DIP

switches.

Follow these steps to set the DIP switches:

1 Locate the DIP switches on the DDI MUX.

Figure 3 Switches on the DDI MUX

Warning: Do not use DS30 channel 7 for the DDI MUX module. If you choose DS30

channel 7, there is no DS30 channel available for the data module.

If your Business Communications Manager system is set to a 3/5 DS30 channel split,

do not use DS30 channel 6 or 7.

DIP switches

123456

Off

Back of the DDI MUX

Module is

right-side up

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Brak uwag

Avaya Digital Drop and Insert (DDI) MUX Przewodnik Instalacji Strona 16