Avaya Configuring RADIUS Instrukcja Użytkownika Pobierz pdf (Strona 84)

Configuring RADIUS

C-2

308640-15.1 Rev 00

Configuring RADIUS Authentication

This example shows how to configure the router as a RADIUS authentication

client, and assumes the following:

• The client is a BLN router.

• The network connections are all raise DTR modem connections.

• The WAN serial interface type is synchronous.

• IP and RIP are the protocols for the client’s unnumbered circuit interface.

• Dial-optimized routing and one-way authentication are configured on the

remote routers.

• A default route of 0.0.0.0 is configured on the remote routers to contact the

client.

Figure C-1

shows the sample network for this example.

Figure C-1. Sample Network Using RADIUS Authentication

The next sections explain how to configure the sample network using the BCC

and Site Manager.

RADIUS server

RADIUS client

POTS

Remote

user B

Remote

user A

CR0002A

MODEM

IP address: 192.32.24.7

IP address: 192.32.24.6

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 115 116

Brak uwag

Avaya Configuring RADIUS Instrukcja Użytkownika Strona 84