Avaya Configuring APPN Services Instrukcja Użytkownika Pobierz pdf (Strona 73)

Editing APPN Parameters

308963-14.00 Rev 00

3-13

Parameter: DLUR Support Enable/Disable

Default: Disable

Options: Enable

Disable

Function: Enables or disables Dependent Logical Unit Requester (DLUR) support

at the network node. DLUR is an APPN component that allows dependent

logical units (LU type 0,1,2,3 and dependent LU6.2) within APPN.

Instructions: Click on Values and select Enable to start DLUR at the network node, or

select Disable to stop DLUR at the network node.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.1.45

Parameter: Default DLUS Name

Default: None

Options: Any valid name with up to 17 characters in the format

<NETID>

<NAME>

;

NETID

is the unique network name with up to 8

characters followed by a period, and

NAME

is the control point name with

up to 8 characters

Function: Specifies the fully qualified default name of the DLUS node that serves

the PU2.0 adjacencies configured on this node. APPN uses the default

name when the DLUR Support Enable/Disable parameter is set to Enable,

and when the DLUR Implicit LS Support parameter is set to Enable for

implicit link stations on the port.

Instructions: If the DLUR Support Enable/Disable parameter is set to Enable, type up

to 8 characters for the network ID; follow with a period, and then type a

control point name with up to 8 characters. You must use uppercase

characters only and the first character must be non-numeric. Blank spaces

(leading, trailing, and embedded) are not allowed in the node name. For

example, APPNNODE.DLUR is a valid entry for this parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.1.54

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 149 150

Brak uwag

Avaya Configuring APPN Services Instrukcja Użytkownika Strona 73