
Reviewed:
03/25/2010
BCM Test Lab Application Notes
©2010 Avaya Inc. All Rights Reserved.
11 of 13
BCM_Configuration_Guide_For
PAETEC.doc
2009-00002460
a. Navigate to Configuration
Æ
Telephony
Æ
Lines
Æ
Target Line and click on the
Target Line configured in Step 2 above
b. Click on the Assigned DNs tab
c. Click the Add button to add the DN of set(s) to this Target Line.
5.1.8.2 Configuring AA to Answer Incoming Calls
Alternatively, the AA on the BCM can be configured to answer incoming calls and then call routed
to a target phone on the BCM by entering the extension of the set at the AA prompt. To do this,
1. Navigate to Configuration
Æ
Telephony
Æ
Lines
Æ
Target Line and click on an unused
target line
2. On the selected Target Line, set the “Pub. Received #” to the last 4-digis of the PAETEC
assigned DID.
3. Navigate to Configuration
Æ
Application
Æ
Voice Messaging/Contact Center
4. Click on the Launch CallPilot Manager.
5. This launches a web browser to the BCM. Log in with the administrator credentials
6. On the left hand navigation menu, click on Auto Attendant
7. In the Line Administration web page, scroll down to the Target Line configured in Step 1.
8. Under the Command Column, click Change
9. In the Line Properties web page, select Auto-Attendant as the Answer Mode
10. Click the Submit button.
5.1.9. Giving Access to SIP Trunks
To give access to BCM phones to make outgoing calls across the SIP trunk;
1. Navigate to Configuration
Æ
Telephony
Æ
Sets
Æ
Active Sets
2. Click on the Line Access tab
3. Click on the DN of each the registered BCM phones in turn and click on the Line Pool Access
tab
4. Click on the Add button
5. In the Add Line Pool dialog box, type bloca
6. Click OK
7. Repeat steps 3 to 6 for each of active sets on the BCM.
Komentarze do niniejszej Instrukcji