Avaya BRI Based Video Conferencing on BCM Technical Przewodnik Konfiguracji Pobierz pdf (Strona 17)

BCM Technical Configuration Guide V1.1 May, 2006

_______________________________________________________________________________________________________________________

NORTEL External Distribution

3. Caveats

3.1 BCM Diagnostics

During the debugging phase of this project, it was observed that the diagnostic information displayed for the BRI

Loops appears to be incorrect and misleading. Unified Manager’s BRI loop diagnostic information may

indicate that they are out of service when in fact they are operational.

If you observe the conditions depicted in the screen captures below, it is recommended that you:

 Complete the programming and attempt to place a video call using BCM Monitor to see if there is activity

from the video unit as it attempts to seize an outgoing line

 Notify Nortel support of your observations, referencing this document

Figure 16: In-service Diagnostic Loop 601 Layer 1

3.2 PRI Trunking

If incoming video calls to the BCM are failing, verify with the Telco that the PRI Trunk has been enabled for voice

and data.

1 2 ... 12 13 14 15 16 17 18 19

Brak uwag

Avaya BRI Based Video Conferencing on BCM Technical Przewodnik Konfiguracji Strona 17