Avaya Configuring BOOTP Services Instrukcja Użytkownika Pobierz pdf (Strona 26)

Configuring SNMP, BootP, and DHCP Services

1-6

308644-15.1 Rev 00

Using Site Manager

To start SNMP, complete the following tasks:

Starting BootP Services

You can start BootP using default values for all parameters. If you decide to

change some or all of the default values, see Chapter Chapter 4, “

Customizing

BootP.”

Before you begin, verify that IP is configured on an interface, as described in

“Configuring IP for Global Protocols

” on page 1-2. You can also enable IP and

BootP on an interface simultaneously.

You can use the BCC or Site Manager to enable BootP on an interface.

Using the BCC

To enable BootP on an interface, go to the IP interface prompt (for example,

box;

eth 2/2; ip/2.2.2.2/255.255.0.0

) and enter:

bootp

For example, the following command enables BootP on IP interface 2.2.2.2.

ip/2.2.2.2/255.255.0.0#

bootp

bootp/2.2.2.2#

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols.

The Protocols menu opens.

2. Choose

IP.

The IP menu opens.

3. Choose

SNMP.

The SNMP menu opens.

4. Choose

Global.

The Edit SNMP Global Parameters

window opens.

5. Click on

. You return to the Configuration Manager

window.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 195 196

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring BOOTP Services Instrukcja Użytkownika Strona 26

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Avaya Configuring BOOTP Services